Refurbished Equipment Sold

Factory Refurbished CPM 7726-7 (2011) with:

  • Fully stripped down, cleaned and re-built.
  • All Gaskets, Seals & fasteners replaced.
  • New bearings & wearing parts, where necessary
  • New Main components, where necessary
  • 200KW Motor 1500 rpm
  • 1 Complete set of roll assemblies
  • Manually operated die & roller hoist
  • Manual Roll Adjustment
  • Door locking system
  • Sandblasted and painted.
SOLD

Fully Refurbished CPM 7930-4/6/8 complete with:

  • 315Kw 1500 rpm motor
  • 1 complete set roll assemblies
  • All new gaskets, seals, fasteners.
  • Bearings checked and replaced where necessary
  • Main components assessed for wear and replaced if necessary
  • Fully Stripped, cleaned, and re-built
  • Manual roll adjustment
  • Dump Chute
  • Door lock system
  • Grease system
  • Sandblasted, primed & painted.   
SOLD

Fully Refurbished CPM 3020-6

  • Including 1500kw 110kw
  • 1 Complete set of roll assemblies
  • Manually operated die & roller hoist
  • Fully stripped, cleaned, and re-built
  • All new bearings, gaskets, and seals
  • Main components checked and replaced if necessary
  • Manual Roll Adjustment
  • Automatic greasing system for rollers
  • Automatic door lock
  • Sandblasted and painted
  • 2024-Refurbishment serial plate
  • Die Size I/D 508 mm x 156 mm working track
  • Gross weight approx. 4000kg, 2700L, 1100W, 1650H mm
SOLD

Factory Refurbished CPM LL Conditioner:

  • Including motor
  • Fully stripped down and rebuilt
  • Main components checked and replaced, where necessary
  • Sandblasted and painted
  • New paddles fitted
SOLD

Factory Refurbished CPM Ecoflo Conditioner & Feeder

  • Feeder with SEW Eurodrive motor
  • Ecoflo E-536 conditioner with 15kw 1500 motor
  • New paddles fitted
  • Gaskets & seals replaced
SOLD

Factory Refurbished CPM 7730-8 press (can also be converted into 77XX models):

  • Fully stripped down, cleaned and re-built.
  • Gaskets and Seals replaced
  • All new bearings
  • Main components checked and replaced, where necessary
  • Sandblasted and painted
  • Choice of Motor 1500 rpm
  • 1 Complete set of roll assemblies
SOLD

Fully Refurbished Paladin 2000 2 Roll Machine (Year 2010):

  • 2 x 132Kw motors
  • 1 complete set of Roll Assemblies (2 x Rolls)
  • Manually operated Die and Roll Hoist
  • Manual Roll Adjustment
  • Fully stripped down, cleaned and re-built
  • Gaskets and Seals replaced
  • Bearings checked and replaced, where necessary
  • Main components checked and replaced, where necessary
  • Automatic Greasing System
  • Sandblasted and Painted
  • Suitable to work with the die with inner diam. 880 mm
  • Large selection of 6, 8, 16mm die’s to choose from
SOLD

Factory Refurbished CPM 2016-4 complete with:

  • 90 Kw motor 1480 rpm
  • 1 Set Roll Assemblies
  • Manual Roll Adjustment
  • Shearpin Assembly
  • Die Clamp assembly
  • Feed cone
  • Sandblasted and painted
  • Including feeder and conditioner’
SOLD

Factory Refurbished CPM 2016-4 complete with:

  • 2 x 132kw motors IE3
  • 1 complete set roll assemblies (2 x rolls)
  • Manually operated die and roll hoist
  • New Door Fitted made by Sevale Enginnering
  •  Manual roll adjustment
  • Full stripped down, cleaned and re-built
  • Gaskets and seals replaced
  • Bearings checked and replaced if necessary
  • Main components checked and replaced if necessary
  • Automatic greasing system
  • Sandblasted and painted
  • 1 x Die
SOLD

CPM 7930-4 Pellet press (sold to Germany):

  • 315Kw motor
  • 1 complete set roll assemblies
  • All new gaskets, seals, fasteners
  • Bearings checked and replaced where necessary
  • Main components assessed for wear and replaced if necessary
  • Fully Stripped, cleaned, and re-built
  • Manual roll adjustment
  • Dump Chute
  • Door lock system
  • Grease system
  • Reservoir greasing system with grease pump
  • Sandblasted, primed & painted.
SOLD

CPM 7930-8 Pellet press (sold to South Africa):

  • 315Kw motor
  • 1 complete set roll assemblies
  • All new gaskets, seals, fasteners
  • Bearings checked and replaced where necessary
  • Main components assessed for wear and replaced if necessary
  • Fully Stripped, cleaned, and re-built
  • Manual roll adjustment
  • Dump Chute
  • Door lock system
  • Grease system
  • Reservoir greasing system with grease pump
  • Sandblasted, primed & painted.
SOLD

Factory Refurbished Paladin 1600 Complete with:

  • 2 x motors 110kw
  • Dump chute
  • 1 x complete set roll assemblies
  • Hydraulic overload protection
  • Manual roll adjustment
  • Feed cone
  • Manual die & roll hoist
  • Front Roll Support Plate
  • Fully stripped down, cleaned and re-built
  • Gaskets and Seals replaced
  • Bearings checked and replaced, where necessary
  • Main components checked and replaced, where necessary
SOLD

Factory Refurbished Paladin 1200 Wide Complete with:

  • 2 x 90Kw 1500 rpm motors
  • Dump chute
  • 1 complete set roll assemblies
  • Hydraulic overload protection
  • Manual roll adjustment
  • Feed cone
  • Manual die & roll hoist
  • Front Roll Support Plate
  • Lubrication system for press rolls and main shaft
  • Sandblasted and painted (colour to be agreed)
  • Die size I/D 650 mm x 175 mm Working Width
SOLD

Factory refurbished CPM 7932-11 (2001 model)

  • 250Kw 1500 rpm Motor
  • Fully stripped down, cleaned and re-built
  • Bearings checked and replaced, where necessary
  • Main components checked and replaced, where necessary
  • Manual roll adjustment
  • All New Bearings fitted (2 x Quill, 2 x Pinion, Mainshaft)
  • All seals, Wear Rings & O Rings replaced
  • Feed Cone & fasteners
  • Manually operated die & roller hoist
  • 1 x Complete Roll Assemblies
  • Sandblasted and Painted
  • Operated 10,000 hours from new
SOLD

NEW IN! Fully Refurbished CPM 7932-9 Pellet Press (can be converted to 7932-11)

  • 250KW Motor
  • Fully Stripped down and assessed
  • All gaskets, seals & bearings checked and replaced if necessary
  • Lineator
  • Pneumatic Die Hoist
  • Pellet Chamber door fitted with dump chute
  • 50 kg Roller Grease system
  • 2 x Dimple Rollers
  • Oil Cooler
  • Tool Box
  • 1 die included
SOLD

Fully Rebuilt in 2017, CPM 7730-8 complete with:

  • 200 KW Motor 1500 rpm
  • New Gearbox Casing (2017)
  • New Main Gear (2017)
  • New Grease Mainshaft (2017)
  • New Pinion Shaft and Bearings (2017)
  • New Shearpin Housing (2017)
  • New Main & Quill Bearings (2017)
  • 1 Complete set of roll assemblies
  • Manually operated die & roller hoist
  • Manual Roll Adjustment
  • Die Clamps
  • Will be Fully Refurbished
  • Sandblasted and painted
SOLD

Factory Refurbished Paladin 1200 Standard Complete with:

  • 2 x 90Kw 1500 rpm motors
  • Dump chute
  • 1 complete set roll assemblies
  • Hydraulic overload protection
  • Manual roll adjustment
  • Feed cone
  • Manual die & roll hoist
SOLD

PTN 900-275 Pellet Press:

  • Fully stripped down and assessed
  • All seals / gaskets replaced
  • Main components / bearings checked for wear and replaced if necessary
  • 2 x 1500 RPM motors (kw 132)
  • 2 x Roller assemblies included dimpled
  • 1 x Die included 3.5 x 65 new (die size 900 x 275mm, Die surface 7771 cm2)
  • Heat traced door
  • Automatic greasing system for main bearings and rollers Manual die and roller hoist
  • Remote Roller adjustment system Sand Blasted and painted
SOLD

Matador M5 Fully refurbished complete with:

  • 22kw Motor 1500rpm
  • Feeder & Conditioner
  • 2 Complete set of roll assemblies (6)
  • Manual Roll Adjustment
  • Stainless steel door
  • Sandblasted and painted
  • New 6mm die & other part used dies
  • Electrical control panel
  • Set up for wood pelleting
SOLD

CPM 7932-9, SN: 7932-9/5112/331 2001 Factory Refurbished complete with:

  • 250Kw1500 rpm motor
  • 1 set roll assemblies
  • Manual roll adjustment
  • Dump chute
  • New Quill Flange and Die Clamps
  • New Shearpin Housing
  • New feed cone
  • New Stiffening Ring
  • New Front Roll Support Plate
  • New Door Liner
  • Manual die hoist
  • All New bearings & seals
  • Reservoir Greasing System
  • Sandblasted & painted
  • Die size I/D825.5mm x track 240mm
SOLD

Fully Refurbished CPM 7122 oil Lubricated Main Shaft complete with:

  • 160Kw 1500 rpm motor
  • 1 complete set roll assemblies
  • Manually operated die and roll hoist
  • Manual roll adjustment
  • Dump Chute
  • Reservoir greasing system with 50kgs grease pump
  • Sandblasted and painted
  • Die Size I/D 572 mm x 116 mm Working Width

MORE CPM 7000 PRESSES AVAILABLE SOON. CONTACT CFE FOR DETAILS

SOLD

CPM 3020-6 Fully Refurbished complete with:

  • 132 KW Motor 1480 rpm
  • 1 Complete set of roll assemblies
  • Manually operated die & roller hoist
  • Force Feeder or Dump Chute
  • Manual Roll Adjustment
  • Automatic greasing system
  • Sandblasted and painted
  • Die Size I/D 508 mm x 156 mm Working Width

Also available CPM conditioner & Geelen 14 x 14 single Deck Cooler

SOLD

Factory Reconditioned CPM 7930-4 oil lubricated main shaft complete with:

  • 250Kw 1500 rpm Motor
  • Heavy Duty Quill Flange
  • Heavy Duty Die Clamps
  • All seals, Wear Rings & O Rings replaced
  • Dump Chute & Air Cylinder
  • Stiffening Ring
  • Feed Cone & fasteners
  • 2 x Complete Roll Assemblies (dimpled or flute)
  • 50 or 200 Kgs reservoir greasing and alarm system
  • Die Size ID 762mm, Track Width 94mm
  • Sandblasted and Painted
SOLD
Destination:Slovakia

Fully Refurbished CPM 7930-8 Oil Lubricated Main Shaft complete with:

  • 250Kw 1500 rpm motor
  • 1 complete set roll assemblies
  • Manually operated die and roll hoist
  • Manual roll adjustment
  • Dump chute
  • Greasing system with 50kgs grease pump
  • Sandblasted and painted
SOLD

Fully Refurbished CPM 7730-6 complete with:

  • 200 KW Motor 1500 rpm
  • 1 Complete set of roll assemblies
  • Manually operated die & roller hoist
  • Manual Roll Adjustment
  • All new bearings and seals fitted
  • Reservoir greasing system
  • Die Clamps
  • CPM Force Feeder
  • Sandblasted and painted

FIRST REFURBISHED PELLET PRESS SOLD TO IVORY COAST

 

SOLD
Destination: Ivory Coast

Year 2001 Factory Reconditioned CPM 7932-9 complete with:

  • 250 KW Motor 1500 rpm
  • 1 Complete set of roll assemblies
  • Manually operated die & roller hoist
  • Manual Roll Adjustment
  • All new bearings and seals fitted
  • Die Clamps
  • Feed cone
  • CPM Force Feeder (can be replaced with dump chute if required)
  • Sandblasted and painted
  • Die Size I/D 825 mm x 240 mm Working Width, Die surface area: 6,220 cm2 

Only operated for 10,000 hours from new

SOLD

Arriving Early 2020: 2017 CPM 7930-4 complete with:

  • 315Kw 1500 rpm Motor
  • Oil Lubricated Rollers system with 1 set roll assemblies
  • Die Clamps
  • Breaker Bars
  • Dump Chute & Air Cylinder
  • Stiffening Ring
  • Feed Cone & fasteners
  • Pneumatic cylinder for QDFC
  • Die Hoist
  • Die Size ID 762mm, Track Width 94mm
  • FULLY SERVICED & CHECKED BY CPM EUROPE
SOLD

Related Pages

MISCELLANEOUS EQUIPMENT
A wide selection of miscellaneous equipment is available from CFE. The range includes motors, mixers, sieves, weighing equipment, coolers etc.
CFE STOCK DIES
CFE stock dies have been fully refurbished which includes water jet cleaning of all holes, skimming of die face and countersinking with latest CNC technology.
Refurbished Equipment
All of the Pellet Presses supplied by CFE are fully refurbished to a high standard. Each press is run in at our UK factory to ensure we deliver a high quality press for long lasting pelleting production.
Back To Top